• User Newbie

    CentOs 7 webserver, installare nuovo hdd da 8 terabyte

    Salve, ho provato diverse guide online ma nessuna va a buon fine e son sempre costretto a riformattare il server che ho acquistato. Qualcuno sa come partizionare, formattare e montare una hdd da 8 terabyte in un webserver? Tengo a precisare che il webserver e' esterno e posso accederci solamente tramite bash da putty. Il mio intento sarebbe quello di montare il nuovo hard disk e sostituirlo a quello precedente da 500 gb per poter avere molto più spazio disponibile. Qualcuno potrebbe cortesemente aiutarmi? Sarebbe abbastanza urgente... grazie
    Offro 50 euro per chi si rende disponibile per montare per bene l'hard disk ed installare lo stack lamp funzionante. E' un lavoro da massimo 20 minuti.

    Quando digito fdisk -l mi appare questo:

    Disk /dev/nvme0n1: 512.1 GB, 512110190592 bytes, 1000215216 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk label type: dos
    Disk identifier: 0x000f3a17
    
            Device Boot      Start         End      Blocks   Id  System
    /dev/nvme0n1p1   *        2048     2099199     1048576   fd  Linux raid autodetect
    /dev/nvme0n1p2         2099200  1000214527   499057664   fd  Linux raid autodetect
    
    Disk /dev/nvme1n1: 500.1 GB, 500107862016 bytes, 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk label type: dos
    Disk identifier: 0x00079732
    
            Device Boot      Start         End      Blocks   Id  System
    /dev/nvme1n1p1   *        2048     2099199     1048576   fd  Linux raid autodetect
    /dev/nvme1n1p2         2099200   976773119   487336960   fd  Linux raid autodetect
    
    Disk /dev/md0: 1071 MB, 1071644672 bytes, 2093056 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    
    Disk /dev/md1: 498.9 GB, 498897780736 bytes, 974409728 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.
    
    Disk /dev/sda: 8001.6 GB, 8001563222016 bytes, 15628053168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disk label type: gpt
    Disk identifier: 959A27A5-409A-4C7A-9E35-A511C12703C2
    
    
    #         Start          End    Size  Type            Name
    
    Disk /dev/mapper/Volume00-root: 450.9 GB, 450887680000 bytes, 880640000 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    
    Disk /dev/mapper/Volume00-swap: 4294 MB, 4294967296 bytes, 8388608 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    
    Disk /dev/mapper/Volume00-tmp: 4294 MB, 4294967296 bytes, 8388608 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    

    Quando invece digito df -h mi appare questo:

    Filesystem                 Size  Used Avail Use% Mounted on
    devtmpfs                    16G     0   16G   0% /dev
    tmpfs                       16G     0   16G   0% /dev/shm
    tmpfs                       16G  393M   16G   3% /run
    tmpfs                       16G     0   16G   0% /sys/fs/cgroup
    /dev/mapper/Volume00-root  414G  393G  167M 100% /
    /dev/mapper/Volume00-tmp   3.9G   17M  3.6G   1% /tmp
    /dev/md0                   990M  152M  772M  17% /boot
    tmpfs                      3.2G     0  3.2G   0% /run/user/0
    

    Invece con lsblk mi appare questo:

    NAME                MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
    sda                   8:0    0   7.3T  0 disk
    nvme0n1             259:0    0   477G  0 disk
    ├─nvme0n1p1         259:1    0     1G  0 part
    │ └─md0               9:0    0  1022M  0 raid1 /boot
    └─nvme0n1p2         259:2    0   476G  0 part
      └─md1               9:1    0 464.7G  0 raid1
        ├─Volume00-root 253:0    0 419.9G  0 lvm   /
        ├─Volume00-swap 253:1    0     4G  0 lvm   [SWAP]
        └─Volume00-tmp  253:2    0     4G  0 lvm   /tmp
    nvme1n1             259:3    0 465.8G  0 disk
    ├─nvme1n1p1         259:4    0     1G  0 part
    │ └─md0               9:0    0  1022M  0 raid1 /boot
    └─nvme1n1p2         259:5    0 464.8G  0 part
      └─md1               9:1    0 464.7G  0 raid1
        ├─Volume00-root 253:0    0 419.9G  0 lvm   /
        ├─Volume00-swap 253:1    0     4G  0 lvm   [SWAP]
        └─Volume00-tmp  253:2    0     4G  0 lvm   /tmp