thunderbird o disco guasto?

furio

thunderbird o disco guasto?

Ho una rete mista, i file più importanti la condivisione delle stampanti ecc, le tengo su un pc debian.
Sulla mia macchina debian (senza interfacccia grafica) tengo anche la posta con thunderbird, per capirci: ho installato thunderbird su 2 macchine windows con due profili ciascuno mentre i messsaggi le impostazioni e quantaltro sono su debian.
Il problema è che un giorno si e uno no quando tento di aprire uno o tutti e due i profili non c'è più nulla e thunderbird mi chiede di creare le impostazioni come se si trattasse di profilo nouvo.
Il culmine l'ho toccato questa sera i profili appena sistemati, recuperati i backup, aggiunti i messaggi mancanti hanno durato ben 3 minuti.
(sono sul disperato andante)
Ho fatto un controllo del disco leggendo una guida su smartctl e usando il comando smartctl -a /dev/hda.

Vi allego il risultato sperando che voi capiate più di quanto non sia riuscito a fare io.
Grazie in anticipo.

debian2:~# smartctl -a /dev/hda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is [url=http://smartmontools.sourceforge.net/]smartmontools Home Page (last updated $Date: 2006/06/13 12:49:03 $)

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP0411N
Serial Number: S01JJ40XA89170
Firmware Version: TW100-11
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Jul 19 00:21:46 2006 CEST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 900) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 15) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 12
3 Spin_Up_Time 0x0007 075 063 000 Pre-fail Always - 4672
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1242
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 326966
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 769
194 Temperature_Celsius 0x0022 163 130 000 Old_age Always - 25
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 164643746
196 Reallocated_Event_Count 0x0012 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail Offline - 0
199 UDMA_CRC_Error_Count 0x000b 100 092 051 Pre-fail Always - 5438
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0

SMART Error Log Version: 1
ATA Error Count: 16405 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mmS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 16405 occurred at disk power-on lifetime: 2722 hours (113 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH

04 51 00 00 c2 4f e0 Error: ABRT